Czasopismo | INŻYNIERIA MATERIAŁOWA | Rocznik 2012 - zeszyt 6

The FeCuAl-Al2O3 coatings deposited by means of supersonic technique - microstructure and properties

nr katalogowy: 73487

In the past few years it has been scientifically and technically demonstrated that the employment of nanostructured materials to produce high performance surfaces is a winning approach for creating coatings with exceptional properties: low friction, and high resistance to wear, temperature, and chemical attack [1÷3]. Advanced, multifunctional nanophased powder systems can be produced using high energy milling technology. This technology exploits mechano- chemical synthesis principles, and simultaneously manages to induce material property improvements such as a fine phase distribution and crystal size refinement [4]. It is necessary to adopt a deposition process which does not damage the nanostructure of starting milled materials (i.e. exposing them to high temperature for prolonged time) in order to take advantage of improved properties. In the coating sector, thermal spray technology is commonly used to produce high thickness coatings in the defense, aerospace and gas turbine industries [5÷7]. Particle velocity and particle temperature, together with substrate temperature, are the most important parameters affecting the deposit formation. Thus, the “Cold Gas Spraying" technology, which uses purely kinetic effects to deposit powders, fulfils the requirement of not damaging the nanostructure, even if it sometimes presents some technical limitations that need to be overcome[7÷9]. Various factors are responsible for the quality of the coating and it’s surface in terms of corrosion and wear resistance. Bonding between sprayed powder particles markedly affects the cohesion and mechanical properties of the coating. In the present study, FeCuAl-Al2O3 (FAC-Al) powder was used to prepare coatings by cold spray process. The aim of this work was to investigate the microstructure of the FeCuAl-Al2O3 coatings obtained by supersonic cold gas spraying of micropowder prepared by the high energy milling of the commercially availa[...]

Jeśli masz wykupiony/przyznany dostęp - zaloguj się. Skorzystaj z naszych propozycji zakupu!

Publikacja


e-Publikacja (format pdf) - nr 73487 "The FeCuAl-Al2O3 coatings..." licencja: Osobista Produkt cyfrowy	10.00 zł

Zeszyt


INŻYNIERIA MATERIAŁOWA - e-zeszyt (pdf) 2012-6 licencja: Osobista Produkt cyfrowy	65.00 zł

Prenumerata

INŻYNIERIA MATERIAŁOWA - prenumerata cyfrowa
licencja: Osobista

Produkt cyfrowy
Nowość

402.00 zł

INŻYNIERIA MATERIAŁOWA - papierowa prenumerata roczna + wysyłka
licencja: Osobista

Szczegóły pakietu

Nazwa
INŻYNIERIA MATERIAŁOWA - papierowa prenumerata roczna	492.00 zł brutto 455.56 zł netto 36.44 zł VAT (stawka VAT 8%)
INŻYNIERIA MATERIAŁOWA - pakowanie i wysyłka	21.00 zł brutto 17.07 zł netto 3.93 zł VAT (stawka VAT 23%)

513.00 zł

INŻYNIERIA MATERIAŁOWA - PAKIET prenumerata PLUS
licencja: Osobista

Szczegóły pakietu

Nazwa
INŻYNIERIA MATERIAŁOWA - PAKIET prenumerata PLUS (Prenumerata papierowa + dostęp do portalu sigma-not.pl + e-prenumerata)	600.00 zł brutto 555.56 zł netto 44.44 zł VAT (stawka VAT 8%)

600.00 zł

Zeszyt

2012-6

Twój Koszyk

Publikacja

Zeszyt

Prenumerata

Zeszyt

Czasopisma