Czasopismo | PRZEGLĄD ELEKTROTECHNICZNY | Rocznik 2021 - zeszyt 4

Optimization Design Evaluation and IEC 60076 Standard Test for Large Oil Type Transformer

10.15199/48.2021.04.03

nr katalogowy: 130995
10.15199/48.2021.04.03

Streszczenie

The optimization of large distribution transformer is designed by using area elimination technique to change dimensional variables such as the number of turns in both sides of winding, induction flux density, electrical length, low current density and high voltage current density. To determine the lowest objective function such as minimum cost, minimum height, minimum weight, or total cost design that matches the consumer's specification, the combination of design technique and production technique was used in the real manufacturing process. This method was used for the design of 8000 kVA 22000 – 3300/1905 V. oil type large distribution transformer. After the design and production in the manufacturing process, the test results were found to be within guaranteed limitation. Furthermore, either the design parameters or the limit of the specification of distribution transformers were varied to find the optimal cost. In this regard, the design procedure of distribution transformers at desire characteristics and minimized total cost were achieved. The transformer was tested according to the IEC standard. It satisfactorily passed both routine and type tests.

Abstract

W artykule opisano optymalizację projektu dużego transformatora prze odpowiedni dobór uzwojeń, indukcji w rdzeniu, gęstości prądu, wymiarów, wagi a także kosztów. Metodę zastosowano do projektu transformatora 8000 kVA 3300/1905 V. Transformator zbadano zgodnie z normą IEC. (Optymalizacja projektu dużego transformatora olejowego i badania jego zgodnie z normą IEC 60076)

Słowa kluczowe

Keywords

Bibliografia

[1] Vadim MANUSOV, Pavel MATRENIN, Nasrullo KHASANZODA,” Power Loss Minimization by Voltage Transformer Turns Ratio Selection based on Particle Swarm Optimization,” PRZEGLĄD ELEKTROTECHNICZNY,R. 95 NR 8/2019, pp.127-131.
[2] Petro STAKHIV1, Oksana HOHOLYUK2, Liliana BYCZKOWSKA-LIPIŃSKA1 Vadim MANUSOV, Pavel MATRENIN, Nasrullo KHASANZODA,” Power Loss Minimization by Voltage Transformer Turns Ratio Selection based on Particle Swarm Optimization,” PRZEGLĄD ELEKTROTECHNICZNY,R. 95 NR 8/2019, pp.127-131.
[3] Andersen, O.W. Optimum design of electrical machines. IEEE Trans. actions on Power Apparatus and Systems. 1967, no. 6, pp 707-11..
[4] Anthony, J., Moses and Bleddyn Thomas. 1974. Problems in the design of power transformers. IEEE Transactions on Magnetics. vol. 10, no .2, pp. 148-150.
[5] Odessey, P.H. 1974. Transformer design by computer. IEEE Transactions on Magnetics. vol. 3, no.1, pp.1-17.
[6] Padma, S., Bhuvaneswari, R., and Subramanian, S. 2006. Optimal design of power transformer using simulated annealing technique. IEEE Conference, International Conference on Industrial Technology (ICIT), December 15-17, pp. 1015-1019, Mumbai, India.
[7] Bharat Heavy Electricals Limited, 1987, Transformers, Delhi : Tata McGraw – Hill Publishing Company Limited.
[8] Jan Pawel Wieczorek, ozdemir Gol and Zbigniew Michalewicz. 1998. An evolutionary algorithm for the optimal design of induction motors. IEEE Transactions on Magnetics. Vol. 34, no. 6, pp. 3882 – 3887.
[9] Sawhney, A.K. A Cause in Electrical Machine Design Delhi : Dhanpat Rai & Sons.
[10] Intrajit Dasgupta, Design of Transformers, New Delhi, Tata McGraw – Hill Publishing Company Limited. Sawhney, A.K. A Cause in Electrical Machine Design Delhi : Dhanpat Rai & Sons.
[11]Georgilakis, P.S., Doulamis, N.D., Doulamis, A.D., Hatziargyriou, N.D., and Kollais,S.D. 2001. A novel iron loss reduction technique for distribution transformer based on a combined genetic algorithm-neural network approach. IEEE Transaction on System, man, Cybernetics. vol. 31, no. 1, pp. 16-34.
[12] Terry E. Shoup, Farrokh Mistree, “ Optimization Methods with Applications for Personal Computers” Englewood Cliffs, New Jersey 07632,1987.
[13] H. Banspach, “Transformer Design,” Lecture Notes, Thai- German Technical Teacher College,1975,Thailand.
[14] Pavlos, S., Georgilakis, Marina Tsili, A. and Athanassios Souflaris. T. 2007. A heuristic solution to the transformer manufacturing cost optimization problem. Journal of Materials Processing Technology. vol. 181, no. 1-3, pp. 260–266.
[15] Bhuvaneswari,R., and Subramanian,S. 2005. Optimization of single-phase induction motor design using radial basis function network. IEEE Indicon Conference, Dec.11-13, pp. 35-40, Chennai, India.
[16] Lucian Tutelea and Ion Boldea. 2010. Induction motor electromagnetic design optimization: Hooke Jeeves method versus Genetic Algorithms. In proceedings of 12th International Conference on Optimization of Electrical and Electronic Equipment, OPTIM, May 20-22, pp. 485-492, Basova.
[17] Nippon steel Corporation, “Technical Data on Electrical Steel Sheet , Japan
[18] Agarwal, R.K. 1997. Principles of Electrical Machine Design. 3rd Ed., S.K. Kataria and Sons, New Delhi.
[19] IEC 60076 International Standard, ”Power Transformer,” 2000.

Jeśli masz wykupiony/przyznany dostęp - zaloguj się. Skorzystaj z naszych propozycji zakupu!

Publikacja


e-Publikacja (format pdf) - nr 46014 "Analiza wielowarstwowej a..." licencja: Osobista Produkt cyfrowy	10.00 zł

Zeszyt


PRZEGLĄD ELEKTROTECHNICZNY- e-zeszyt (pdf) 2021-4 licencja: Osobista Produkt cyfrowy Nowość	55.00 zł

Prenumerata

PRZEGLĄD ELEKTROTECHNICZNY - prenumerata cyfrowa
licencja: Osobista

Produkt cyfrowy
Nowość

762.00 zł

PRZEGLĄD ELEKTROTECHNICZNY - PAKIET prenumerata PLUS
licencja: Osobista

Szczegóły pakietu

Nazwa
PRZEGLĄD ELEKTROTECHNICZNY - PAKIET prenumerata PLUS (Prenumerata papierowa + dostęp do portalu sigma-not.pl + e-prenumerata)	1002.00 zł brutto 927.78 zł netto 74.22 zł VAT (stawka VAT 8%)

1002.00 zł

PRZEGLĄD ELEKTROTECHNICZNY - papierowa prenumerata roczna + wysyłka
licencja: Osobista

Szczegóły pakietu

Nazwa
PRZEGLĄD ELEKTROTECHNICZNY - papierowa prenumerata roczna	960.00 zł brutto 888.89 zł netto 71.11 zł VAT (stawka VAT 8%)
PRZEGLĄD ELEKTROTECHNICZNY - pakowanie i wysyłka	42.00 zł brutto 34.15 zł netto 7.85 zł VAT (stawka VAT 23%)

1002.00 zł

Zeszyt

2021-4

Twój Koszyk

Publikacja

Zeszyt

Prenumerata

Zeszyt

Czasopisma