Czasopismo | PRZEGLĄD ELEKTROTECHNICZNY | Rocznik 2020 - zeszyt 12

A detailed review on Si, GaAs, and CIGS/CdTe based solar cells and efficiency comparison

10.15199/48.2020.12.02

nr katalogowy: 129259
10.15199/48.2020.12.02

Streszczenie

A solar cell is technically known as a photovoltaic device which converts light energy into an electric energy by the phenomenon called photovoltaic effect. Solar cells produce renewable energy and serve as a great substitute for conventional sources of energy such as petroleum, coal and natural gas. Solar cell is suitable for powering satellites due to its light weight and durability for several years, having ability to operate even in the vacuum space. It is also used in solar warm air electric power plants and every other PV powered devices ranging from heating systems, lighting, automobile to solar updraft towers and etc. It is of utmost demand to support research and development of renewable energy resources that would successfully power the world in the future without destroying the environment as the planet earth needs reduction in greenhouse gas emission. Immense progress has been observed over the years on several photovoltaic materials and devices based on conversion efficiencies.. This survey primarily focusses on different techniques and technologies analysed from the other cited references to enhance the working of a solar cell like selection of the most suitable material for each layer, various processing techniques and modifying the layer thickness of buffer. This review paper summarizes solar cell materials like Gallium Arsenide (GaAs), Silicon (Si), Cu(In,Ga)(S,Se2) (CIGS) and Cadmium Telluride (CdTe) that provide higher efficiencies when compared to other materials. In summation, it is understood that Gallium Arsenide solar cell provides highest efficiency when compared to Si, CIGS and CdTe based one junction solar cell. Factors such as, efficiency (ƞ), open circuit voltage (Voc), short circuit current density (Jsc) & fill factor (FF) have been analysed for the study of modeling, simulation and fabrication of solar cell. Detailed survey has been presented in this paper on different types of solar cells that would help the researchers to do more research on these solar cells.

Abstract

W artykule dokonao przeglądu i porównania różnych technologgi ogniw fotowoltaicznych. Przedstawiono ogniwa krzemowe, ogniwa bazujące na CdTe i CIGS oraz ogniwa bazujące na Gallium Arsenide (GaAs). W każdej grupie przedstawiono I porównano osiągane obecnie parametry I właściwości. (Przegląd ogniw fotowoltaicznych bazujących na Si, GaAs, i CIGS/CdT p porównanie skuteczności)

Słowa kluczowe

Keywords

Bibliografia

Numerical simulation of multi-quantum well solar cells GaAs / InAs using silvaco atlas | Request PDF. (n.d.). Retrieved May 6, 2020, from ResearchGate website: https://www.researchgate.net/publication/312094823_Numerica l_simulation_of_multiquantum_well_solar_cells_GaAs_InAs_us ing_silvaco_atlas Aissat, A., Benyettou, F., Nacer, S., & Vilcot, J. P. (2017). Modeling and simulation of solar cells quantum well based on SiGe/Si. International Journal of Hydrogen Energy, 42(13), 8790–8794. Al Wahshi, N., & Nayfeh, A. (2014). Single junction GaAs—Ge stacked tandem cell. 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC), 0295–0298. Ali, K., Khan, S. A., & MatJafri, M. Z. (2016). TCAD design of silicon solar cells in comparison of antireflection coatings and back surface field. Optik, 127(19), 7492–7497. Arefinia, Z., & Asgari, A. (2018a). Optimization Study of a Novel Few-Layer Graphene/Silicon Quantum Dots/Silicon Heterojunction Solar Cell Through Opto-Electrical Modeling. IEEE Journal of Quantum Electronics, 54(1), 1–6. Arefinia, Z., & Asgari, A. (2018b). Optimization Study of a Novel Few-Layer Graphene/Silicon Quantum Dots/Silicon Heterojunction Solar Cell Through Opto-Electrical Modeling. IEEE Journal of Quantum Electronics, 54(1), 1–6. Asim, N., Sopian, K., Ahmadi, S., Saeedfar, K., Alghoul, M. A., Saadatian, O., & Zaidi, S. H. (2012). A review on the role of materials science in solar cells. Renewable and Sustainable Energy Reviews, 16(8), 5834–5847. Attari, K., Amhaimar, L., El yaakoubi, A., Asselman, A., & Bassou, M. (2017). The Design and Optimization of GaAs Single Solar Cells Using the Genetic Algorithm and Silvaco ATLAS
[Research Article]. Bachmann, K. J., Buehler, E., Shay, J. L., & Wagner, S. (1976). Polycrystalline thin‐film InP/CdS solar cell. Applied Physics Letters, 29(2), 121–123. Čampa, A., Valla, A., Brecl, K., Smole, F., Muñoz, D., & Topič, M. (2018). Multiscale Modeling and Back Contact Design of Bifacial Silicon Heterojunction Solar Cells. IEEE Journal of Photovoltaics, 8(1), 89–95. Carlson, D. E. (1990). Photovoltaic Technologies for Commercial Power Generation. Annual Review of Energy, 15(1), 85–98. Chavali, R. V. K., Johlin, E. C., Gray, J. L., Buonassisi, T., & Alam, M. A. (2016). A Framework for Process-to-Module Modeling of a-Si/c-Si (HIT) Heterojunction Solar Cells to Investigate the Cell-to-Module Efficiency Gap. IEEE Journal of Photovoltaics, 6(4), 875–887. Connolly, J. (2012). Photochemical Conversion and Storage of Solar Energy. Elsevier. Cruz, A. G. G., Solís, M. D., González, L. G., Torres, J. H., López, M. L., Puente, G. C., … Peredo, L. Z. (2017). Theoretical study of c-GaN/GaAs single heterojunction solar cells. Matéria (Rio de Janeiro), 22(4). PRZEGLĄD ELEKTROTECHNICZNY, ISSN 0033-2097, R. 96 NR 12/2020 17 Davidson, L., Haque, K. A. S. M. E., & Toor, F. (2017). Analytical model for simulating thin-film/wafer-based tandem junction solar cells. Solar Energy, 150, 287–297. Demtsu, S. H., & Sites, J. R. (2005). Quantification of losses in thinfilm CdS/CdTe solar cells. Conference Record of the Thirty- First IEEE Photovoltaic Specialists Conference, 2005., 347– 350. Dimroth, F., Grave, M., Beutel, P., Fiedeler, U., Karcher, C., Tibbits, T. N. D., … Schwarzburg, K. (2014). Wafer bonded fourjunction GaInP/GaAs//GaInAsP/GaInAs concentrator solar cells with 44.7% efficiency: Wafer bonded four-junction concentrator solar cells with 44.7% efficiency. Progress in Photovoltaics: Research and Applications, 22(3), 277–282. Dong, B., Bailey, C. G., Afanasev, A., & Zaghloul, M. (2014). Modeling and simulation of InAs/GaAs quantum dot solar cells in SILVACO TCAD. 2014 IEEE 40th Photovoltaic Specialist Conference (PVSC), 0476–0478. Fardi, H., & Buny, F. (2013). Characterization and Modeling of CdS/CdTe Heterojunction Thin-Film Solar Cell for High Efficiency Performance. International Journal of Photoenergy, 2013, 1–6. Fell, A., Schön, J., Müller, M., Wöhrle, N., Schubert, M. C., & Glunz, S. W. (2018). Modeling Edge Recombination in Silicon Solar Cells. IEEE Journal of Photovoltaics, 8(2), 428–434. Feurer, T., Reinhard, P., Avancini, E., Bissig, B., Löckinger, J., Fuchs, P., … Tiwari, A. N. (2017). Progress in thin film CIGS photovoltaics - Research and development, manufacturing, and applications: Progress in thin film CIGS photovoltaics. Progress in Photovoltaics: Research and Applications, 25(7), 645–667. Friedlmeier, T. M., Jackson, P., Bauer, A., Hariskos, D., Kiowski, O., Wuerz, R., & Powalla, M. (2015). Improved Photocurrent in Cu(In,Ga)Se 2 Solar Cells: From 20.8% to 21.7% Efficiency with CdS Buffer and 21.0% Cd-Free. IEEE Journal of Photovoltaics, 5(5), 1487–1491. Fritts, C. E. (1883). On a new form of selenium cell, and some electrical discoveries made by its use. American Journal of Science, Series 3 Vol. 26(156), 465–472. Galiana, B., Rey-Stolle, I., Baudrit, M., García, I., & Algora, C. (2006). A comparative study of BSF layers for GaAs-based single-junction or multijunction concentrator solar cells. Semiconductor Science and Technology, 21(10), 1387–1392. Gloeckler, M., Sankin, I., & Zhao, Z. (2013). CdTe Solar Cells at the Threshold to 20% Efficiency. IEEE Journal of Photovoltaics, 3(4), 1389–1393. González, R., & Antonio, J. (2013). Characterization, modelling and optimization of industrial silicon thin film solar cells. Retrieved from Hoseinzadeh, S., Ghasemiasl, R., Bahari, A., & Ramezani, A. H. (2017a). N-type WO3 semiconductor as a cathode electrochromic material for ECD devices. Journal of Materials Science: Materials in Electronics, 28(19), 14446–14452. Hoseinzadeh, S., Ghasemiasl, R., Bahari, A., & Ramezani, A. H. (2017b). The injection of Ag nanoparticles on surface of WO3 thin film: Enhanced electrochromic coloration efficiency and switching response. Journal of Materials Science: Materials in Electronics, 28(19), 14855–14863. Hoseinzadeh, S., Ghasemiasl, R., Bahari, A., & Ramezani, A. H. (2018). Effect of Post-annealing on the Electrochromic Properties of Layer-by-Layer Arrangement FTO-WO3-Ag-WO3- Ag. Journal of Electronic Materials, 47(7), 3552–3559. Hoseinzadeh, S., & Ramezani, A. H. (2019). Investigation of Ta/NIIWO3/ FTO Structures as a Semiconductor for the Future of Nanodevices. Journal of Nanoelectronics and Optoelectronics, 14(10), 1413–1419. Hosen, Md. B., Bahar, A. N., Ali, Md. K., & Asaduzzaman, Md. (2017). Modeling and performance analysis dataset of a CIGS solar cell with ZnS buffer layer. Data in Brief, 14, 246–250. Huang, C. H., Li, S. S., & Anderson, T. J. (2002). Device modeling and simulation of CIS-based solar cells. Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002., 748–751. Huang, N., & Povinelli, M. L. (2014). Design of Passivation Layers on Axial Junction GaAs Nanowire Solar Cells. IEEE Journal of Photovoltaics, 4(6), 1511–1517. Hubbard, S. M., Cress, C. D., Bailey, C. G., Raffaelle, R. P., Bailey, S. G., & Wilt, D. M. (2008). Effect of strain compensation on quantum dot enhanced GaAs solar cells. Applied Physics Letters, 92(12), 123512. Hussain, S., Mehmood, H., & Ali, G. (2014). Nanocrystalline silicon (nc-Si:H) and amorphous silicon (a-Si:H)based thin-film multijunction solar cell. InGaP/GaAs‐based multijunction solar cells—Takamoto—2005— Progress in Photovoltaics: Research and Applications—Wiley Online Library. (n.d.). Retrieved May 6, 2020, from Jackson, P., Hariskos, D., Wuerz, R., Kiowski, O., Bauer, A., Friedlmeier, T. M., & Powalla, M. (2015). Properties of Cu(In,Ga)Se2 solar cells with new record efficiencies up to 21.7%. Physica Status Solidi (RRL) – Rapid Research Letters, 9(1), 28–31. Jankovec, M., Topič, M., & Herman, M. (2013). Optimisation of the I–V measurement scan time through dynamic modelling of solar cells. IET Renewable Power Generation, 7(1), 63–70. Kim, K., Nguyen, H. D., Mho, S., & Lee, J. (2013). Enhanced Efficiency of GaAs Single-Junction Solar Cells with Inverted- Cone-Shaped Nanoholes Fabricated Using Anodic Aluminum Oxide Masks. International Journal of Photoenergy, 2013, 1–5. Kim, S., Park, M.-S., Geum, D.-M., Kim, H., Ryu, G., Yang, H.-D., … Choi, W. J. (2015). Fabrication and characterization of single junction GaAs solar cell epitaxially grown on Si substrate. Current Applied Physics, 15, S40–S43. Kobayashi, T., Jehl Li Kao, Z., Kato, T., Sugimoto, H., & Nakada, T. (2016). A comparative study of Cd‐ and Zn‐compound buffer layers on Cu(In 1− x ,Ga x )(S y ,Se 1− y ) 2 thin film solar cells. Progress in Photovoltaics: Research and Applications, 24(3), 389–396. Landis, G. A., & Bailey, S. G. (1995). Advances in solar cell technology. AIP Conference Proceedings, 324, 1001–1010. Li, X., Chen, W., Zhang, S., Wu, Z., Wang, P., Xu, Z., … Lin, S. (2015). 18.5% efficient graphene/GaAs van der Waals heterostructure solar cell. Nano Energy, 16, 310–319. https://doi.org/10.1016/j.nanoen.2015.07.003 Li, X., Zhang, S., Wang, P., Zhong, H., Wu, Z., Chen, H., … Lin, S. (2015). High performance solar cells based on graphene-GaAs heterostructures. Nano Energy, 16, 310 Malaquias, J. C., Berg, D. M., Sendler, J., Steichen, M., Valle, N., & Dale, P. J. (2015). Controlled bandgap CuIn1−xGax(S0.1Se0.9)2 (0.10≤x≤0.72) solar cells from electrodeposited precursors. Thin Solid Films, 582, 2–6. Mansfield, L. M., Kuciauskas, D., Dippo, P., Li, J. V., Bowers, K., To, B., … Ramanathan, K. (2015). Optoelectronic investigation of Sb-doped Cu(In,Ga)Se2. 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC), 1–4. Maragliano, C., Colace, L., Chiesa, M., Rampino, S., & Stefancich, M. (2013). Three-Dimensional Cu(InGa)Se\bf 2 Photovoltaic Cells Simulations: Optimization for Limited-Range Wavelength Applications. IEEE Journal of Photovoltaics, 3(3), 1106–1112. Masuko, K., Shigematsu, M., Hashiguchi, T., Fujishima, D., Kai, M., Yoshimura, N., … Okamoto, S. (2014). Achievement of More Than 25% Conversion Efficiency With Crystalline Silicon Heterojunction Solar Cell. IEEE Journal of Photovoltaics, 4(6), 1433–1435. Matin, M. A., Mannir Aliyu, M., Quadery, A. H., & Amin, N. (2010). Prospects of novel front and back contacts for high efficiency cadmium telluride thin film solar cells from numerical analysis. Solar Energy Materials and Solar Cells, 94(9), 1496–1500. Meillaud, F., Shah, A., Droz, C., Vallat-Sauvain, E., & Miazza, C. (2006). Efficiency limits for single-junction and tandem solar cells. Solar Energy Materials and Solar Cells, 90(18), 2952– 2959. Mingsukang, M. A., & Arof, M. H. B. and A. K. (2017). Third- Generation-Sensitized Solar Cells. Nanostructured Solar Cells. Moon, S., Kim, K., Kim, Y., Heo, J., & Lee, J. (2016). Highly efficient single-junction GaAs thin-film solar cell on flexible substrate. Scientific Reports, 6(1), 30107. Morales-Acevedo, A. (2014). Design of Very thin CdTe Solar Cells with High Efficiency. Energy Procedia, 57, 3051–3057. Müller, J., Rech, B., Springer, J., & Vanecek, M. (2004). TCO and light trapping in silicon thin film solar cells. Solar Energy, 77(6), 917–930. Muzzillo, C. P., & Anderson, T. J. (2018). Surface and bulk effects of K in Cu1−xKxIn1−yGaySe2 solar cells. Solar Energy Materials and Solar Cells, 179, 362–371. Nakamura, J. (2017, January 24). Development of Heterojunction Back Contact Si Solar Cells. Presented at the The Japan Society of Applied Physics. 18 PRZEGLĄD ELEKTROTECHNICZNY, ISSN 0033-2097, R. 96 NR 12/2020 Nanayakkara, S. U., Horowitz, K., Kanevce, A., Woodhouse, M., & Basore, P. (2017). Evaluating the economic viability of CdTe/CIS and CIGS/CIS tandem photovoltaic modules: Economic viability of CdTe/CIS and CIGS/CIS tandem photovoltaic modules. Progress in Photovoltaics: Research and Applications, 25(4), 271–279. Needleman, D. B., Wagner, H., Altermatt, P. P., & Buonassisi, T. (2016). Three-Dimensional TCAD Modeling of Grain Boundaries in High-Efficiency Silicon Solar Cells. IEEE Journal of Photovoltaics, 6(4), 817–822. 739 Nishio, T., Omura, K., Hanafusa, A., Arita, T., Higuchi, H., Aramoto, T., … Takakura, H. (1996). Thin-film CdS/CdTe solar cell with 15.05% efficiency. Conference Record of the Twenty Fifth IEEE Photovoltaic Specialists Conference - 1996, 953–956. Ohyama, H., Aramoto, T., Kumazawa, S., Higuchi, H., Arita, T., Shibutani, S., … Murozono, M. (1997). 16.0% efficient thin-film CdS/CdTe solar cells. Conference Record of the Twenty Sixth IEEE Photovoltaic Specialists Conference - 1997, 343–346. Ortiz, E., Algora, C., Rey-Stolle, I., Khvostikov, V. P., & Andreev, V. M. (2000). Experimental improvement of concentrator LPE GaAs solar cells for operation at 1000 suns with an efficiency of 26.2%. Conference Record of the Twenty-Eighth IEEE Photovoltaic Specialists Conference - 2000 (Cat. No.00CH37036), 1122–1125. Plá, J., Barrera, M., & Rubinelli, F. (2007a). The influence of the InGaP window layer on the optical and electrical performance of GaAs solar cells. Semiconductor Science and Technology, 22(10), 1122–1130. Plá, J., Barrera, M., & Rubinelli, F. (2007b). The influence of the InGaP window layer on the optical and electrical performance of GaAs solar cells. Semiconductor Science and Technology, 22(10), 1122–1130. Rahman, T., & Boden, S. A. (2017). Optical Modeling of Black Silicon for Solar Cells Using Effective Index Techniques. IEEE Journal of Photovoltaics, 7(6), 1556 Ramanujam, J., & Singh, U. P. (2017). Copper indium gallium selenide based solar cells – a review. Energy & Environmental Science, 10(6), 1306–1319. Ramezani, A. H., Hoseinzadeh, S., & Ebrahiminejad, Zh. (2020). Structural and mechanical properties of tantalum thin films ected by nitrogen ion implantation. Modern Physics Letters B, 2050113. Reinhard, P., Chirila, A., Blosch, P., Pianezzi, F., Nishiwaki, S., Buechelers, S., & Tiwari, A. N. (2013). Review of progress toward 20% efficiency flexible CIGS solar cells and manufacturing issues of solar modules. 2012 IEEE 38th Photovoltaic Specialists Conference (PVSC) PART 2, 1–9. Romeo, A., Terheggen, M., Abou-Ras, D., Bätzner, D. L., Haug, F.- J., Kälin, M., … Tiwari, A. N. (2004). Development of thin-film Cu(In,Ga)Se2 and CdTe solar cells. Progress in Photovoltaics: Research and Applications, 12(23), 93–111. Safa Sultana, R., Bahar, A. N., Asaduzzaman, Md., & Ahmed, K. (2017). Numerical modeling of a CdS/CdTe photovoltaic cell based on ZnTe BSF layer with optimum thickness of absorber layer. Cogent Engineering, 4(1). Sobayel, K., Shahinuzzaman, M., Amin, N., Karim, M. R., Dar, M. A., Gul, R., … Akhtaruzzaman, Md. (2020). Efficiency enhancement of CIGS solar cell by WS2 as window layer through numerical modelling tool. Solar Energy, 207, 479–485. Song, T., Kanevce, A., & Sites, J. R. (2015). Design of Epitaxial CdTe Solar Cells on InSb Substrates. IEEE Journal of Photovoltaics, 5(6), 1762–1768. Tamboli, A. C., Bobela, D. C., Kanevce, A., Remo, T., Alberi, K., & Woodhouse, M. (2017). Low-Cost CdTe/Silicon Tandem Solar Cells. IEEE Journal of Photovoltaics, 7(6), 1767–17 Vernon, S. M., Tobin, S. P., Haven, V. E., Geoffroy, L. M., & Sanfacon, M. M. (1991). High-efficiency concentrator cells from GaAs on Si. The Conference Record of the Twenty-Second IEEE Photovoltaic Specialists Conference - 1991, 353–357. Xu, X.-B., Wang, X.-Y., Gu, W.-P., Quan, S., & Zhang, Z. (2017). Study on influences of CdZnS buffer layer on CdTe solar cells. Superlattices and Microstructures, 109, 463–469. Zhou, C., Chung, H., Wang, X., & Bermel, P. (2016). Design of CdZnTe and Crystalline Silicon Tandem Junction Solar Cells. IEEE Journal of Photovoltaics, 6(1), 301–308. en.wikipedia.org www.waferworld.com

Jeśli masz wykupiony/przyznany dostęp - zaloguj się. Skorzystaj z naszych propozycji zakupu!

Publikacja


e-Publikacja (format pdf) - nr 44204 "Ustrój termiczny powietrz..." licencja: Osobista Produkt cyfrowy	10.00 zł

Zeszyt


PRZEGLĄD ELEKTROTECHNICZNY- e-zeszyt (pdf) 2020-12 licencja: Osobista Produkt cyfrowy Nowość	55.00 zł

Prenumerata

AURA OCHRONA ŚRODOWISKA - prenumerata cyfrowa
licencja: Osobista

Produkt cyfrowy
Nowość

312.00 zł

AURA OCHRONA ŚRODOWISKA - papierowa prenumerata roczna + wysyłka
licencja: Osobista

Szczegóły pakietu

Nazwa
AURA OCHRONA ŚRODOWISKA - papierowa prenumerata roczna	384.00 zł brutto 355.56 zł netto 28.44 zł VAT (stawka VAT 8%)
AURA OCHRONA ŚRODOWISKA - pakowanie i wysyłka	42.00 zł brutto 34.15 zł netto 7.85 zł VAT (stawka VAT 23%)

426.00 zł

AURA OCHRONA ŚRODOWISKA - PAKIET prenumerata PLUS
licencja: Osobista

Szczegóły pakietu

Nazwa
AURA OCHRONA ŚRODOWISKA - PAKIET prenumerata PLUS (Prenumerata papierowa + dostęp do portalu sigma-not.pl + e-prenumerata)	480.00 zł brutto 444.44 zł netto 35.56 zł VAT (stawka VAT 8%)

480.00 zł

Zeszyt

2020-12

Twój Koszyk

Publikacja

Zeszyt

Prenumerata

Zeszyt

Czasopisma