Wyniki 1-1 spośród 1 dla zapytania: authorDesc:"Aleksandr O. SHEPELEV"

The grid element temperature considering when selecting measures to reduce energy losses on the example of reactive power compensation DOI:10.15199/48.2018.08.24

Czytaj za darmo! »

One of the effective directions of energy savings is the reduction of energy losses in grids and increase the transmission capacity of lines [1-2]. There is a standard set of measures to reduce losses. Selecting measures from the set in general includes two stages: - calculation of optimal exposure (appropriate way of introducing measures); - feasibility study (the payback period determination). Refinement of calculations on each step increases the measures introduction efficiency to reduce losses. In its turn, the accuracy is determined with the accepted model of the power supply mode. We consider the most important parameters that are changed with the introduction of measures to reduce losses [3]. Such parameters include the temperature resistance dependence of the grid active elements [4-7]. We present below specific examples that analyzed the influence of the temperature resistance dependence on the results of the measures selection to reduce losses and the expediency of the parameter consideration. In this case, we determined reactive power compensation as test measures, since, on the one hand, it is the most efficient and widespread measure to reduce energy losses, increase the voltage in the grids and [8-10], on the other hand, when there is reactive power compensation fully reported, both stages of selection are presented.. The calculation of the optimal exposure Economically justified selection of reactive power sources in the grid is always an optimization problem. The objective function, in general, is a criterion of economic efficiency, more often they are reduced costs; in particular cases, we can use power losses or active power losses instead of the reduced costs. Optimization problem is solved in different ways depending on the rated voltage, the grid configuration and types of compensating devices used. The article deals with the problem of choosing the static capacitor bank (BSC) in the node of non-bran[...]

 Strona 1